Pypes Mid Muffler System and Prochamber

JRay05stang · 2/27/08, 6:26 PM

http://videos.streetfire.net/video/6...2900e86f32.htm

This is not my video but this is honestly one amazing sounding exhaust combo! Is anyone else running this set up? If the O/R Prochamber and the SLP's turn out to be to loud I will probably be aiming for this setup!

ADudeInNewJersey · 2/27/08, 7:00 PM

I have that exact setup... Im gonna install the prochamber and mid mufflers on Sat.. Too bad im running the high flow cats tho... Oh well.. now that im faster i dunt have to scare em... Gettin a KB put in next week!

JRay05stang · 2/27/08, 7:49 PM

I have been running SLP LM's for the last 2 years but my head cannot take much more of the drone associated with them... I like it loud but the drone goes straight to the head... That set up sounds absolutely amazing and aggressive! But honestly I am sure video cannot do it justice! I am surely looking into this setup minus the long tubes...

JRay05stang · 2/27/08, 7:49 PM

BTW is it possibly to try and use the SLP LM tips with the mid muffler system? I am not a fan of the mid muffler tips...

05GT-O.C.D. · 2/27/08, 9:52 PM

Quote:

Originally Posted by JRay05stang

BTW is it possibly to try and use the SLP LM tips with the mid muffler system? I am not a fan of the mid muffler tips...

I'm not sure about the SLP's, but I can tell you that the Pypes tips are just a simple clamp on tip.

I've been watching for a used prochamber for a while. I'd like to run that setup as well.

ColdStone · 2/28/08, 12:07 PM

I use the SPL Axle back w/ the Pypes Mid Muffler system (not a fan of the Pypes tips at all). It was sure a PITA to get the SLP's over the new Pypes over axle pipes, but after a little elbow grease and some curse words I got them on and the worked out quite nice.

Cheers,

Cold

n8rfastback · 2/28/08, 5:44 PM

hey cold can we get some pics of those tips???

JRay05stang · 3/6/08, 4:21 PM

Ya I would love the just keep my slp tips... they look so good with the car.. but I really really want to run this system with an uncatted prochamber... I cant wait til I get the money to do it!

SONICBOOST · 3/7/08, 10:59 PM

Dude, that rev at 18 sec sounds amazing!!!!!!!!!!!!!!!!!!!!!!!!

JRay05stang · 3/12/08, 10:04 PM

I have to have this set up! I will be ordering the mid muffler system soon! But the off road prochamber will have to wait until I get a job...

*CO_VaporGT_09* · 11/8/09, 3:01 PM

Resurrecting an old thread here to see if anyone came up with a better solution to the Pypes tips turning yellow, see here:

http://forums.themustangsource.com/s...4&postcount=38

I'm running just the stock headers, cats, H, and have only had it about 6 months but they're ugly enough to require removal at this point. Definitely not just due to running an off road setup, thought that may worsen it.
May be possible to buff them out with silver polish or something similar, but not going to do that every 6 months, and besides the rolled edge looks cheap, and has a black streak where the condensation has dripped out.

I bought a set of Stainless Steel Systems's plain tips from PartsCheap for like $60 or so, they're just like these tips from their Adrenaline/Terminator series

http://www.stangmods.com/SSS-Cat-Bac...GT-p/00870.htm

And similar to these SLP:

but they're much too long, the SSS ones are about 12". The Pypes hangers are too close to the rear for these to work, so anybody wanting to buy them let me know. I did cut four longitudinal slashes into each tip and used a pipe expander as they weren't slip fit for a 2.5" pipe, so now they'll slip on and clamp easily.

I'm thinking of getting SLP tips like these at LMP that should fit better, definitely cheaper than going the full Loudmouth or muffler delete route, and shold be easier to put on, though will be twice the price of the SSS, and are only 3.5" diameter instead of the 4":

http://www.lmperformance.com/53765/73.html

Anybody know the length of these as they might be perfect:

http://www.slponline.com/view_product.asp?P=F31040

SONICBOOST · 11/8/09, 8:05 PM

I most definently love my prochamber and PMM

Best combo so far for me!!

gmantheman · 11/9/09, 11:39 AM

Since you already have the SLPs you could go another mid-muffler route. Magnaflow sells mufflers that are similar to Pypes M-80s.

*CO_VaporGT_09* · 11/9/09, 1:05 PM

For some reason SLP's images don't show up all the time.

I don't have any SLP tips, only the SSS tips that are 12" long. I'd need a completely different axle-back piece with hangers and all, and that's the expensive way.

I saw a few on ebay that I think might work, and are cheaper than SLP's, but are probably lower quality as well.

SONICBOOST · 11/9/09, 2:37 PM

Quote:

Originally Posted by gmantheman

Since you already have the SLPs you could go another mid-muffler route. Magnaflow sells mufflers that are similar to Pypes M-80s.

Was that for me?

gmantheman · 11/9/09, 11:31 PM

Quote:

Originally Posted by SONICBOOST

Was that for me?

That was for the OP. I know you already have a mid muffler set-up.

*CO_VaporGT_09* · 11/9/09, 11:50 PM

Uh, I do too...see sig.

2/27/08, 6:26 PM	#1
JRay05stang Bullitt Member Join Date: December 12, 2006 Posts: 235	Pypes Mid Muffler System and Prochamber http://videos.streetfire.net/video/6...2900e86f32.htm This is not my video but this is honestly one amazing sounding exhaust combo! Is anyone else running this set up? If the O/R Prochamber and the SLP's turn out to be to loud I will probably be aiming for this setup!

2/27/08, 7:00 PM	#2
ADudeInNewJersey Bullitt Member Join Date: February 25, 2007 Posts: 228	I have that exact setup... Im gonna install the prochamber and mid mufflers on Sat.. Too bad im running the high flow cats tho... Oh well.. now that im faster i dunt have to scare em... Gettin a KB put in next week! __________________ 05 Mustang GT, Auto, 2.4 KB, PI 3200, Mac LTs+ProChamber and Pypes mids -John

2/28/08, 12:07 PM	#6
ColdStone Newbie Join Date: June 6, 2005 Posts: 17	I use the SPL Axle back w/ the Pypes Mid Muffler system (not a fan of the Pypes tips at all). It was sure a PITA to get the SLP's over the new Pypes over axle pipes, but after a little elbow grease and some curse words I got them on and the worked out quite nice. Cheers, Cold __________________ 2005 Mineral Grey GT Premium AUTO Current Mods: Jet TBS; Pypes O/R H & Mid Muffler; SLP Axl-Back Planned: JLT CAI /w STC2; UDP; 3.73's; BBK Tuned Shorties; 1" Drop Dreaming: Saleen Series VI TwinScrew supercharger (Boing!) Ordered: 2/14/05 DORA: 2/15/05 VIN: 6/06/05 Built: 6/13/05 Shipped: 6/20/05 Delivered: 7/05/05

2/28/08, 5:44 PM	#7
n8rfastback Shelby GT350 Member Join Date: June 25, 2007 Posts: 2,418	hey cold can we get some pics of those tips??? __________________ 1965 Fastback 2+2, white with blue stripes, cragar keystone classics, white on black pony interior, 289 with classic Tri Y headers, flowmaster 40's, flamethrower coil, pointless ignition, holly 600cfm carb SOLD---2005 GT Coupe, Torch red, Hurst shifter, CDC shaker scoop, CDC Aggressive Chin Spoiler, Shortie Antenna, JLT II CAI with SCT Xcal and Brenspeed tunes, BBK Longtubes, BBK Catted X Pipe, Pypes Mid Mufflers, Carroll Shelby signed dash plaque, shaker 1000 audio, dark charcoal interior w leather, engine start button.

3/7/08, 10:59 PM	#9
SONICBOOST Shelby GT500 Member ADAAAM Join Date: January 17, 2006 Location: Temecula,CA Posts: 2,669	Dude, that rev at 18 sec sounds amazing!!!!!!!!!!!!!!!!!!!!!!!! __________________ 2005sonicGT *5spd Manual with mods....* *Waiting for 2014*

2/27/08, 7:49 PM	#3
JRay05stang Bullitt Member Join Date: December 12, 2006 Posts: 235	I have been running SLP LM's for the last 2 years but my head cannot take much more of the drone associated with them... I like it loud but the drone goes straight to the head... That set up sounds absolutely amazing and aggressive! But honestly I am sure video cannot do it justice! I am surely looking into this setup minus the long tubes...

3/6/08, 4:21 PM	#8
JRay05stang Bullitt Member Join Date: December 12, 2006 Posts: 235	Ya I would love the just keep my slp tips... they look so good with the car.. but I really really want to run this system with an uncatted prochamber... I cant wait til I get the money to do it!

3/12/08, 10:04 PM	#10
JRay05stang Bullitt Member Join Date: December 12, 2006 Posts: 235	I have to have this set up! I will be ordering the mid muffler system soon! But the off road prochamber will have to wait until I get a job...

11/8/09, 3:01 PM	#11
CO_VaporGT_09 Team Mustang Source Josh Join Date: August 5, 2008 Location: Arvada, CO Car: 2009 Vapor GT 5MT GlassRoof Posts: 269	Resurrecting an old thread here to see if anyone came up with a better solution to the Pypes tips turning yellow, see here: http://forums.themustangsource.com/s...4&postcount=38 I'm running just the stock headers, cats, H, and have only had it about 6 months but they're ugly enough to require removal at this point. Definitely not just due to running an off road setup, thought that may worsen it. May be possible to buff them out with silver polish or something similar, but not going to do that every 6 months, and besides the rolled edge looks cheap, and has a black streak where the condensation has dripped out. I bought a set of Stainless Steel Systems's plain tips from PartsCheap for like $60 or so, they're just like these tips from their Adrenaline/Terminator series http://www.stangmods.com/SSS-Cat-Bac...GT-p/00870.htm And similar to these SLP: but they're much too long, the SSS ones are about 12". The Pypes hangers are too close to the rear for these to work, so anybody wanting to buy them let me know. I did cut four longitudinal slashes into each tip and used a pipe expander as they weren't slip fit for a 2.5" pipe, so now they'll slip on and clamp easily. I'm thinking of getting SLP tips like these at LMP that should fit better, definitely cheaper than going the full Loudmouth or muffler delete route, and shold be easier to put on, though will be twice the price of the SSS, and are only 3.5" diameter instead of the 4": http://www.lmperformance.com/53765/73.html Anybody know the length of these as they might be perfect: http://www.slponline.com/view_product.asp?P=F31040 __________________ 2009 Vapor GT Manual, chamois, glass roof, HID. 20x9" ASA JH8 wheels w/ 255/35-20 General Exclaim UHP Audio: Infinity 6x8 2ways and components, Kicker CVT8s, MB Quart Amps, Pioneer F90BT Go/Stop: Steeda CAI w/ Tillman Tune, Pypes Mid-mufflers F: Saleen/Stoptech 14" 4 pot, R: Roush track-pack rotors, EBC Redstuff Suspension: Vogtland springs, Tokico D-Specs, Steeda adj. LCAs, CHE anti-squat, Steeda AR bars, J&M panhard bar & 3rd link Exterior: HID fogs, Sequential LED taillights, LED signal mirror housings, CDC Ducktail Last edited by CO_VaporGT_09; 11/8/09 at 9:19 PM.

11/8/09, 8:05 PM	#12
SONICBOOST Shelby GT500 Member ADAAAM Join Date: January 17, 2006 Location: Temecula,CA Posts: 2,669	I most definently love my prochamber and PMM Best combo so far for me!! __________________ 2005sonicGT *5spd Manual with mods....* *Waiting for 2014*

11/9/09, 11:39 AM	#13
gmantheman Bullitt Member Join Date: January 27, 2008 Posts: 289	Since you already have the SLPs you could go another mid-muffler route. Magnaflow sells mufflers that are similar to Pypes M-80s. __________________ Magnaflow Magnapacks MAC Prochamber hi-flow Cats. Steeda UDP Diablo predator-Bamachips tunes (87,89,91 tq/race) JLT Intake FRPP 4.10

11/9/09, 1:05 PM	#14
CO_VaporGT_09 Team Mustang Source Josh Join Date: August 5, 2008 Location: Arvada, CO Car: 2009 Vapor GT 5MT GlassRoof Posts: 269	For some reason SLP's images don't show up all the time. I don't have any SLP tips, only the SSS tips that are 12" long. I'd need a completely different axle-back piece with hangers and all, and that's the expensive way. I saw a few on ebay that I think might work, and are cheaper than SLP's, but are probably lower quality as well. __________________ 2009 Vapor GT Manual, chamois, glass roof, HID. 20x9" ASA JH8 wheels w/ 255/35-20 General Exclaim UHP Audio: Infinity 6x8 2ways and components, Kicker CVT8s, MB Quart Amps, Pioneer F90BT Go/Stop: Steeda CAI w/ Tillman Tune, Pypes Mid-mufflers F: Saleen/Stoptech 14" 4 pot, R: Roush track-pack rotors, EBC Redstuff Suspension: Vogtland springs, Tokico D-Specs, Steeda adj. LCAs, CHE anti-squat, Steeda AR bars, J&M panhard bar & 3rd link Exterior: HID fogs, Sequential LED taillights, LED signal mirror housings, CDC Ducktail

11/9/09, 11:50 PM	#17
CO_VaporGT_09 Team Mustang Source Josh Join Date: August 5, 2008 Location: Arvada, CO Car: 2009 Vapor GT 5MT GlassRoof Posts: 269	Uh, I do too...see sig. __________________ 2009 Vapor GT Manual, chamois, glass roof, HID. 20x9" ASA JH8 wheels w/ 255/35-20 General Exclaim UHP Audio: Infinity 6x8 2ways and components, Kicker CVT8s, MB Quart Amps, Pioneer F90BT Go/Stop: Steeda CAI w/ Tillman Tune, Pypes Mid-mufflers F: Saleen/Stoptech 14" 4 pot, R: Roush track-pack rotors, EBC Redstuff Suspension: Vogtland springs, Tokico D-Specs, Steeda adj. LCAs, CHE anti-squat, Steeda AR bars, J&M panhard bar & 3rd link Exterior: HID fogs, Sequential LED taillights, LED signal mirror housings, CDC Ducktail

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode