My Boss Dyno results
#1
Cobra R Member
Thread Starter
Join Date: December 13, 2004
Location: United States
Posts: 1,708
Likes: 0
Received 3 Likes
on
3 Posts
My car is completely stock.
Dynojet STD.
394 max power /357 max Trq.
Stock key made more hp. But Track key made more trq.
Two pulls were in wrong gear 382,387.
Then 3 runs in 5th .
1 run stock key 394 hp 354 torque
2 passes track key both 391 hp and 357 torque
Dynojet STD.
394 max power /357 max Trq.
Stock key made more hp. But Track key made more trq.
Two pulls were in wrong gear 382,387.
Then 3 runs in 5th .
1 run stock key 394 hp 354 torque
2 passes track key both 391 hp and 357 torque
Last edited by UnrealFord; 9/11/12 at 10:51 AM.
#12
V6 Member
Join Date: September 11, 2011
Location: South Central Pa.
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
#15
GT Member
Join Date: March 6, 2012
Location: VA Beach
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
I have had mine on the dyno with the steeda cai and aed tune. The owner said its the newest version of the dyno jet and reads much lower than all the others out there. said it reads more like a mustang dyno.
run conditions are:
73 degrees F
humidy 15%
30.38 in-hg
sae: 0.95
uncorrected dyno sheet (sorry had to take a pic of the print out)
Sae corrected all three pulls
run conditions are:
73 degrees F
humidy 15%
30.38 in-hg
sae: 0.95
uncorrected dyno sheet (sorry had to take a pic of the print out)
Sae corrected all three pulls
Last edited by Boss2511; 10/17/12 at 07:42 AM.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
2015 - 2023 MUSTANG
0
9/24/15 08:15 PM