Repair and Service Help All Repair related problems, issues, TSBs, and anything else revolving around the Repair of your Mustang

Dashboard rattle

Thread Tools
 
Search this Thread
 
Old 7/13/05, 12:20 PM
  #1  
Member
Thread Starter
 
Bopcat's Avatar
 
Join Date: June 18, 2005
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
I have a rattle from the driver's side dashboard. I think I've localized it to the black plastic piece nearest to the windshield where the defroster vents are located.
On other cars I've owned there has been either a foam strip or black rubber wedges placed between this piece and the windshield. Could someone check and see if their GT has any foam or wedges? I think I can solve this by putting some foam in the space between the plastic and the windshield. Noise goes away when its hot and the plastic expands. The dash sure does creak with temperature changes.
Thanks.
Old 7/13/05, 12:54 PM
  #2  
GT Member
 
05windveilbluegt's Avatar
 
Join Date: November 21, 2004
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Bopcat@July 13, 2005, 12:23 PM
I have a rattle from the driver's side dashboard. I think I've localized it to the black plastic piece nearest to the windshield where the defroster vents are located.
On other cars I've owned there has been either a foam strip or black rubber wedges placed between this piece and the windshield. Could someone check and see if their GT has any foam or wedges? I think I can solve this by putting some foam in the space between the plastic and the windshield. Noise goes away when its hot and the plastic expands. The dash sure does creak with temperature changes.
Thanks.
I did the same thing on my passenger's side, i got some foam brushes from target. ripped off the foam and placed it between the dash and the pillar. wedged in there really well. No more rattle. Just percuss the front of the dashboard while putting in the foam and see if the rattling stops with the faom.
Another rattle was being caused by wires rattling against the metal hinge of the glove box. I opened the glovebox completely until it was hanging down, and wrapped a small towel around this metal part to isolate it from the rattling wires. that solved that problem.
no more rattles
Old 7/13/05, 12:58 PM
  #3  
Mach 1 Member
 
flight96's Avatar
 
Join Date: October 20, 2004
Location: Victoria Canada
Posts: 728
Likes: 0
Received 0 Likes on 0 Posts
I have a "vibration" rattle on my passenger side...Its driving me crazy. Its behind the panel just above the glovebox. If I put pressure on the panel the rattle goes away. Dealer here I come....
Old 7/13/05, 12:58 PM
  #4  
Member
Thread Starter
 
Bopcat's Avatar
 
Join Date: June 18, 2005
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Thanks.
Old 7/13/05, 01:03 PM
  #5  
GT Member
 
05windveilbluegt's Avatar
 
Join Date: November 21, 2004
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by flight96@July 13, 2005, 1:01 PM
I have a "vibration" rattle on my passenger side...Its driving me crazy. Its behind the panel just above the glovebox. If I put pressure on the panel the rattle goes away. Dealer here I come....
You don't need to go to the dealer, just wedge some black foam between the dashboard and the pillar the rattle goes away. Easy 5 minute fix, and you don't ened up getting your dashboard taken apart and a slew of other rattles to follow.
Old 7/13/05, 01:06 PM
  #6  
V6 Member
 
E-Rock's Avatar
 
Join Date: February 1, 2005
Posts: 94
Likes: 0
Received 0 Likes on 0 Posts
Post

Originally posted by flight96@July 13, 2005, 1:01 PM
I have a "vibration" rattle on my passenger side...Its driving me crazy. Its behind the panel just above the glovebox. If I put pressure on the panel the rattle goes away. Dealer here I come....
Welcome to the rattle club. A lot of people have posted about the same problem. The service center was having trouble finding it so I pressed firmly on the dash and it hasn't made a peep in a week. I'm pretty sure it will return but for now I have my sanity back.
Old 7/13/05, 02:19 PM
  #7  
Member
 
Lucky_Stang's Avatar
 
Join Date: July 12, 2005
Posts: 45
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by E-Rock@July 13, 2005, 12:09 PM
Welcome to the rattle club. A lot of people have posted about the same problem. The service center was having trouble finding it so I pressed firmly on the dash and it hasn't made a peep in a week. I'm pretty sure it will return but for now I have my sanity back.
Thank god, This was driving me nuts, I'm going to have to try this to fix it.
Old 7/13/05, 02:37 PM
  #8  
V6 Member
 
BeOnEdge's Avatar
 
Join Date: February 17, 2005
Posts: 96
Likes: 0
Received 0 Likes on 0 Posts
i had that rattle and it actually ended up not being the dash but the pillar that goes from the dash to the roof. the plastic wasnt snapped down all the way. all i did was press it into place and you could hear it snap in. yay! no more rattle.
Old 7/13/05, 05:04 PM
  #9  
Team Mustang Source
 
RMac's Avatar
 
Join Date: December 13, 2004
Location: Sterling Heights, Michigan
Posts: 778
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by 05windveilbluegt@July 13, 2005, 1:06 PM
You don't need to go to the dealer, just wedge some black foam between the dashboard and the pillar the rattle goes away. Easy 5 minute fix, and you don't ened up getting your dashboard taken apart and a slew of other rattles to follow.

Could you post a pic of exactly where you placed the foam?

I have the same rattle but haven't located the proper place to insert the foam yet (tired a couple of places, but the rattle didn't go away).

My rattle may be the glove box issue you had (the rattle goes away when the glove box is opened), so I'll try that as well.

Thanks.
Old 7/13/05, 05:28 PM
  #10  
Bullitt Member
 
ZRX4ME's Avatar
 
Join Date: July 19, 2004
Posts: 419
Likes: 0
Received 0 Likes on 0 Posts
dealer added a bit of insulation(foam) to dash and rattle went away.
Old 7/13/05, 05:31 PM
  #11  
Cobra Member
 
Imatk's Avatar
 
Join Date: January 13, 2005
Posts: 1,339
Likes: 0
Received 1 Like on 1 Post
Good old Ford

One thing they all have are those little rattles.

After 13 years you'll become an expert and finding those little buggers
Old 7/13/05, 08:35 PM
  #12  
GT Member
 
05windveilbluegt's Avatar
 
Join Date: November 21, 2004
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by BeOnEdge@July 13, 2005, 2:40 PM
i had that rattle and it actually ended up not being the dash but the pillar that goes from the dash to the roof. the plastic wasnt snapped down all the way. all i did was press it into place and you could hear it snap in. yay! no more rattle.
i'll post pics tomorrow its an easy do it yourself fix.
Old 7/15/05, 07:22 AM
  #13  
GT Member
 
05windveilbluegt's Avatar
 
Join Date: November 21, 2004
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
[attachmentid=27452]Sorry for the picture quality. I wedged the foam in this location and this has stopped the rattle. It's not easy to see unless you are looking for it as it is black and i have the dark charcoal interior.
Old 7/15/05, 07:51 AM
  #14  
Mach 1 Member
 
Blk'05's Avatar
 
Join Date: February 17, 2005
Posts: 553
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by 05windveilbluegt@July 15, 2005, 11:25 PM
[attachmentid=27452]Sorry for the picture quality. I wedged the foam in this location and this has stopped the rattle. It's not easy to see unless you are looking for it as it is black and i have the dark charcoal interior.
This is why I love this board!! Thanks 05Wind I think I'll also try this..
Old 7/15/05, 08:29 AM
  #15  
GT Member
 
05windveilbluegt's Avatar
 
Join Date: November 21, 2004
Posts: 138
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Blk'05@July 15, 2005, 7:54 AM
This is why I love this board!! Thanks 05Wind I think I'll also try this..
you're welcome
If you still have a rattle try wrapping a small towel around the glovebox hinge to isolate it from wires that may be vibrating against the metal

Now the only sound i hear in the car is the motor
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
GTPETE
Car Care
8
10/12/15 02:20 PM
khoy37
Introductions
2
9/15/15 07:10 PM
robjh22
Suspension, Brakes, and Tire Tech
4
9/8/15 12:31 PM
apial
'10-14 V6 Modifications
4
9/6/15 10:40 AM
JonsMustang
2010-2014 Mustang
12
8/31/15 08:44 AM



Quick Reply: Dashboard rattle



All times are GMT -6. The time now is 09:08 AM.