Cobra Drifter
6/20/08, 7:38 PM
I went to the speedway yesterday and, for my first time, ran some disappointing times. They have an 1/8 track and it was soooo hot there. ~100 degrees :(
Ran 9.28 best time at 79.11 mph. (launching issues as I'm learning and have the wheel hop issue :()
I have real bad wheel hop as its a notorious issue with IRS on the 01's.
A local shop, db performance is recommending new arms, bushings and weld a support bar in since it a convt. Urethane bushings all around which are stiffer then the stock ones.
Does this sound about right to get rid of it? Its going to cost a small grip of $$$ :(
Ran 9.28 best time at 79.11 mph. (launching issues as I'm learning and have the wheel hop issue :()
I have real bad wheel hop as its a notorious issue with IRS on the 01's.
A local shop, db performance is recommending new arms, bushings and weld a support bar in since it a convt. Urethane bushings all around which are stiffer then the stock ones.
Does this sound about right to get rid of it? Its going to cost a small grip of $$$ :(